Are there electrical performance specifications (contact resistance/continuity)? What are the permissible limits?

Yes. The terminal has defined electrical performance indicators, typically including contact resistance and/or continuity (conduction) verification, with specified maximum allowable limits.

What electrical parameters are usually specified Contact resistance (or interface resistance) This is the resistance measured at the mated interface between the terminal and the corresponding connector/contact. The acceptance criterion is usually a maximum contact resistance value (e.g., 𝑅 max ⁡ R max ​ at a defined test current and temperature), and sometimes also a limit on change after aging/reliability tests. Conductor electrical continuity / resistance For applications that require confirmation of no open circuit, we verify continuity (pass/fail) and/or total resistance of the conductor path within a specified limit. Stability after tests (if required) Depending on your customer spec, electrical metrics must remain within limits after thermal cycling, vibration/shock, humidity/corrosion aging, and/or mating cycles. Allowed limit values The exact allowable values depend on the terminal part number and the customer/application standard. In our process, we apply the datasheet/customer tolerance, and we can provide:

the specified maximum contact resistance / continuity criteria, the test method (measurement setup, test current/voltage, temperature), and the pre- and post-test resistance change limits (if applicable). What we need from you to confirm the exact limits Please share:

Terminal part number (or datasheet) Required mating connector/contact system (female/male/contact housing) Wire type and crimp type (conductor crimp only vs conductor+insulation crimp) Any customer standard you must meet (or your target acceptance criteria) After that, we will provide the allowed electrical limit values and the corresponding test/inspection plan for your acceptance.